| Time to Cast This procedure should all look familiar if you have been following this project. the only difference, was that this was a very large master to cast. First thing to do, was ensure inside of the master was filled carefully with soft putty. |
 Click Once To Enlarge |
| The Casting Form A form was built around the master and putty was rolled around the bottom edge to keep the silicone from leaking out. |
 Click Once To Enlarge |
| Silicone In The silicone was first brushed on with a small disposable paint brush to ensure all the details were captured and then the remainder was poured in to fill the form. |
 Click Once To Enlarge |
 |
 |
 |
| Geschützen Intro / 28cm Geschützeturme / 17cm SK L/40 Kasematten / 8,8 cm SK L/35 / Final Product |